Electronic Options

All Motion Concepts electronics are designed to ensure the smooth and seamless operation of every power positioning system we manufacture. From the Super Low Pivot Tilt to our most customized power positioning solution, each electronic component is designed with flexiblility and modularity needed to provide years of safe and reliable service.
Motor Controllers standard features include:
  • A standard, accessible attendant switch to control the power seating functions or the ability to add one
  • Soft start and soft stop provide a smooth, easy transition and eliminate quick, “jerky” tilts or hard stops at the beginning and end of any command
  • Drive lockout with SMARTS to eliminate mercury splash
  • Standard, independent variable speed actuator control
  • Interface capability with electronic operating systems of major power base manufacturers such as Quantum Rehab, Quickie and Invacare

SINGLE Function Contol Box:
Controls one seating function through a separate switch or toggle, or through the wheelchair drive controls
Helix 1.0 Single Function Controller
  • When used independently, the 1.0 can control 1 power seating function through a separate switch or toggle
  • Equipped with two 1/8" switch jacks that can accept any mechanical switch for direct or auto reversing control
  • When interfaced with an M12 interface box (Quickie or Quantum) or a M70 interface box (Invacare) one function an be controlled through the power base drive controls while retaining function of both switch ports
  • Variable speed actuator control inside box
M12B PG Interface Adapter
  • Provides seamless interface between Helix 1.0 or 2.0 allowing user to control one or two functions through PG drive controls (Quickie or Quantum)
  • User still retains all functions provided in Helix 1.0 or Helix 2.0
M70 Invacare Interface Adapter
  • Provides seamless interface between Helix 1.0 or 2.0 allowing user to control one or two functions through MKIV or MKV drive controls (Invacare)
  • User still retains all functions provided in Helix 1.0 or Helix 2.0
S-21 Single Push Button Switch
  • Single push button switch with 1/8" plug
  • Allows control of one seating function in auto reversing mode
  • Compact & durable, molded into impact resistant and waterproof plastic frames with a rubber gasket surrounding switch to resist fouling from food, fluids etc
S-32 Dual Push Button Switch
  • Dual push button mechanical switch with 1/8" plug
  • Allows control of 2 functions in auto reversing mode or 1 function in direct mode
  • Compact & durable, molded into impact resistant and waterproof plastic frames with a rubber gasket surrounding switch to resist fouling from food, fluids etc
S37 Single Toggle Box
  • Single toggle box in compact aluminum box with 1/8" plug
  • Operates 1 function in direct mode or 2 functions in auto reversing mode
  • Can be used with any application that requires a single mechanical switch with 1/8" plug

DUAL Function Contol Box:
Designed to allow control of one or two seating functions through a separate switch, or toggle, or through the power wheelchair drive controls
Helix 2.0 Dual Function Controller
  • When used independently, the 2.0 can control 2 power seating function through a separate switch or toggle
  • Equipped with one DB9 plug that can accept any mechanical switch for direct or auto reversing control
  • When interfaced with an M12 interface box (Quickie or Quantum) or a M70 interface box (Invacare) one function can be controlled through the power base drive controls while retaining function of both switch ports
  • Variable speed actuator control inside box
M12B PG Interface Adapter
  • Provides seamless interface between Helix 1.0 or 2.0 allowing user to control one or two functions through PG drive controls (Quickie or Quantum)
  • User still retains all functions provided in Helix 1.0 or Helix 2.0
M70 Invacare Interface Adapter
  • Provides seamless interface between Helix 1.0 or 2.0 allowing user to control one or two functions through MKIV or MKV drive controls (Invacare)
  • User still retains all functions provided in Helix 1.0 or Helix 2.0
S-32 Dual Push Button Switch
  • Dual push button mechanical switch with female 9 pin plug
  • Allows control of 2 functions in auto reversing mode or 1 function in direct mode
  • Compact & durable, molded into impact resistant and waterproof rubber gasket surrounding switch to resist fouling from food, fluids etc
S-34 Quad Push Button Switch
  • Quad push button mechanical switch with female 9 pin plug
  • Allows control of 2 functions in direct mode or up to 4 functions in auto reversing mode
  • Compact & durable, molded into impact resistant and waterproof plastic frames with a rubber gasket surrounding switch to resist fouling from food, fluids etc
S-38 Dual Toggle Box
  • Durable, low profile aluminum case with dual toggles and female 9 pin plug
  • Allows control of one function in direct mode or two functions in auto reversing mode
  • Excellent option for clients with limited hand function
  • Drive lockout (DLO) indicator
M26 Four Way Toggle Box
  • Durable, low profile aluminum case with dual toggles and female 9 pin plug
  • Four direction toggle allows control of 2 functions in direct mode or four functions in auto reversing mode
  • Visible LED on top of box for drive lockout (DLO)

ENHANCED Function Contol Box:
Single and dual function enhanced motor control boxes provide the same function as our standard motor control boxes with several additional functional benefits. These control boxes are designed to operate power positioning functions through a separate switch or toggle box, or can be interfaced with the M12B or M70 to allow operation of the power positioning system through the wheelchair drive controls. Enhanced motor control boxes offer additional functions, such as
  • Accessible attendant control toggle switch standard on top of box
  • LED on top of box provides visual confirmation when chair is in drive lockout
  • Variable speed dials are accessible on outside of box for independent control of actuator speeds without programmer
M17/M27 Enhanced Single Function Controller
  • Controls single function through mechanical switch with 9 pin or 1/8" plug
  • When interfaced with M12 (PG) or M70 (Invacare) allows control of one function through power base drive controls
  • Still retains ability to use separate switch when controlling through drive controls
  • Accessible variable speed actuator dial and attendant toggle on top of box
  • Visible LED for drive lockout
M14/M33 Enhanced Dual Function Controller
  • Controls two functions through mechanical switch with 9 pin
  • When interfaced with M12 (PG) or M70 (Invacare) allows control of two functions through power base drive controls
  • Still retain ability to use separate switch when controlling through drive controls
  • Accessible variable speed actuator dial and attendant toggle on top of box
  • Visible LED for drive lockout

MULTIPLE Function Contol Box:
Our Enhanced Multiple Function control boxes provide maximum modularity, programmability and function to meet virtually any application. These control boxes are able to control from 1 to 6 power positioning functions while also offering the following features:
  • Standard Tipsy Angle Sensor & reduced drive speed
  • Ability to drive an elevating seat system while elevated
  • LEDs on top of box provide visual confirmation of drive lockout reduced drive and home functions
  • Variable speed control and attendant control of four motors
Helix 5 Series for Invacare
  • For control of up to 6 functions through a separate switch or toggle or through MKIV or MKV drive controls (Invacare ECU)
  • Provides the modularity needed to add functions throughout life of power positioning system
Helix 5 Series for PG
  • For control of up to 6 functions through a separate switch or toggle or through PG drive controls (Quickie or Quantum)
  • Provides the modularity needed to add functions throughout life of power positioning system
Seat Function Display
  • Custom backlit LCD function display shows direction of seat function
  • Controls up to 6 functions in Helix 5 Series Seat Controllers through a single 2 or 4 way switch
  • Works with any Input switch with DB9 connection, including ECU
  • Works in toggle or direct mode
  • Backlighting shuts off in 20 seconds
  • Flexible goose-neck mount for adjustable positioning
 
ELECTRONICS ACCESSORIES:
M59 Bi-Directional Limit Control
  • Programming independent limits to any single motor
  • Can program the beginning and ending ranges of any single motor using adjustable limit switches
M25 PG Redel Splitter Box
  • For use with PG drive control systems (Quickie or Quantum
  • Allows 2 extra Redel ports to be added to PG system for additional interfacing of attendant drive controls etc
M11 TIPSY Multi-Position Angle Sensor
  • Sleek, sealed, single plug design replaces multiple mercury switches and plugs
  • Easy, push button programming of drive lockout, reduced speed and tilt/ limit settings
  • Works in conjunction with Helix 5.4 or 5.5 only
Hercules Power Box
  • Standard on all bariatric systems
  • Enhances power for heavily loaded systems
  • Designed with a down limit shut-off
PS96 - Power Outlet
  • Provides ability to charge any device with 12 volt power source (auto power plug) from power base batteries
  • In-line power harness is compatible with all Motion Concepts controller harnesses
  • Durable case with weather resistant rubber cap
  • Output 11.5 - 12.5 Volts DC, maximum output 3 AMPS
M16 Splitter Box
  • Sleek, compact box accommodates up to 5 mechanical switches
  • Converts 5 separate mechanical switch inputs into one industry standard female 9 pin connector
  • Useful when multiple mechanical switches are located in several different locations on chair
  • For use with 1/8” plugs
M06 Attendant Power Switch
  • Instantly shuts down all power to the entire wheelchair seating system
  • Single switch can be mounted for attendant or client user
  • Overrides unintentional and unauthorized control of power positioning functions
  • Power on status is indicated with red LED signal
  • Also places power base in drive lockout
M07 Lazarus Jump Starter
  • Battery Charger Booster
  • When the battery voltage levels drop too low for the automatic charger to start charging, the Lazarus sends the required signal to begin charging
  • Durable push button start switch
  • Charging status indicated with green LED
  • Must be used in conjunction with off-board charger
C53 Actuator Power By-Pass Cable
  • Standard on all systems where battery access can be hindered when batteries have been depleted beyond charging and require replacement
  • Connects between the existing actuator cable and the elevating actuator
  • Bypasses system batteries to operate elevator and service power base
  • Works with 12 volt or 24 volt
MACHC - Multi Action Custom Hardware Control
  • Used to configure industry standard 2 and 4 way inputs to multiple chair control options
  • Provides the ability to program what each switch or toggle command controls in the power positioning system
  • Maximize the functional control of each user and their system