M40-12 SLD G 12V Sealed Gel Battery by MK Battery
Get more information on M40-12 SLD G 12V Sealed Gel Battery by MK Battery
**The images used on the website are for reference only and does not reflects the actual configuration of the product. Learn more..
Get more information on M40-12 SLD G 12V Sealed Gel Battery by MK Battery
Product Review
FAA Approved
Made in USA
Features
M40-12 SLD G sealed gel battery by MK battery has no liquid of any kind, it is completely sealed with gel/suspended electrolyte. The 12 volt gel battery is maintenance free, has no need of adding water periodically and eliminates corrosive acid fumes and spills. Individual Plate Formation (IPF) technology optimizes power capacity, cell consistency, and long-term reliability.
Features:
- Genuine Gel Technology: Electrolyte immobilized in gel prevents spillage, meets international standards.
- Increased Durability: Offers 2-3 times cycle life of AGM batteries in high-demand applications.
- Gelled/Suspended Electrolyte: Completely sealed, safe in any position except upside down.
- Deep Cycle Performance: Capable of over 1000 cycles (50% DOD), independently tested.
- Travel & Shipping Approval: FAA, IATA, DOT, and UPS approved for ease of transport.
- Safety Features: Special re-sealing vent system minimizes explosion risk under normal conditions.
- Maintenance-Free Sealed Construction: Eliminates watering, acid fumes, spills, and electrolyte stratification.
- Electrolyte Management: No equalization charging required, faster recharge, 10% more electrolyte.
- Self-Discharge: Less than 2% per month, minimal deterioration during transport and storage.
- Advanced Plate Technology: Individual Plate Formation (IPF®) maximizes power capacity, consistency, and long-term reliability.
- Quality Assurance: Over 250 quality control checks, UL Recognized Component, certified to ISO 9001.
Sizing
M40-12 SLD G Sealed Gel Battery by MK Battery | |
Length | 7.76" |
Width | 6.62" |
Height | 6.88" |
Nominal voltage | 12 Volts. |
Capacity at C/100 | 48 Ah |
Capacity at C/20 | 40 Ah |
Capacity at C/5 | 34 Ah |
Weight | 31.5 lbs. |
Plate alloy | Lead calcium |
Posts | Epoxy Seal Threaded Brass Post |
Container/cover | Polypropylene |
Operating temperature range | -76°F (-60°C) - 140°F (60°C) |
Charge voltage @ 77°F | 13.8 - 14.6 volts, cycle |
13.4 - 13.6 volts, float | |
Vent | Self-sealing |
Electrolyte | Sulfuric acid thixotropic gel |
Terminal | C (Threaded insert w/ 1/4" - 20 round hole) |
Videos
MK Gel Batteries
Documents
Warranty
- The manufacturer will replace the battery with a free equivalent if it fails due to defects in materials or workmanship within 13 months from the date of the initial installation.
- A battery used in a mobility application rated lower than 20 amp hours will be replaced with a free equivalent if it fails due to defects in materials or workmanship within 6 months from the date of installation.
- Proof of date of purchase/installation required for all claims.
- Upon receipt of the defective battery, manufacturer will process the claim and reimburse for any direct freight costs.
- Warranty does not cover failures in service due to the following conditions:
- Normal "wear and tear".
- Unauthorized modifications or alterations to the products.
- Negligence, accident, abuse, misuses including improper jump starting, or improper, unsuitable or abnormal storage of the products.
- Improperly installed or applied batteries. Improperly charged (either under or over) batteries. Opening of batteries that are designed and intended in use as sealed products.
- Physical damage due to acts of nature or man which stress products beyond design limits or other undesirable influences.
- Manufacturer considers AGM batteries to be suitable for light duty mobility equipment only. AGM batteries used in more robust applications such as complex rehab mobility devices, where daily deep discharges are the norm, may void the warranty.
- Any storage of batteries shall be at an ambient temperature of 77°F or less and user shall give a freshening charge to all batteries every 6 months.
- Manufacturer shall not be liable for consequential, incidental, special or direct damages, whether the claim for any such damages is based on warranty, tort, contract, or otherwise.
- Any labor cost for service under warranty is not covered as per our terms of sale.
- Standard manufacturer terms & conditions are applicable for warranty for this product.
Please call us for specific details.
Returns
- Products return policy is applicable as per the standard manufacturer terms & conditions provided.
Please call us for specific details.