M50-12 SLD M 12V Sealed AGM Battery by MK Battery
Get more information on M50-12 SLD M 12V Sealed AGM Battery by MK Battery
**The images used on the website are for reference only and does not reflects the actual configuration of the product. Learn more..
Get more information on M50-12 SLD M 12V Sealed AGM Battery by MK Battery
Features
M50-12 SLD M sealed AGM battery by MK battery features ultra premium sealing valve which prevents capacity loss and controls pressure. AGM battery is suitable for lighter duty mobility devices to meet the needs of the user. Sealed AGM battery has fortified posts, straps and welds that resist vibration damage and maximize current transfer. The quality construction of battery ensures consistent and reliable performance for long-term dependability.
Features:
- Spillproof Design: These batteries completely absorb electrolyte, ensuring a spillproof design for enhanced safety and peace of mind.
- Advanced AGM Technology: Featuring Sealed Absorbed Glass Mat technology, These batteries are valve-regulated for efficient recombination, maximizing performance and longevity.
- Ultra Premium Sealing Valve: Equipped with an ultra-premium sealing valve, These batteries prevent capacity loss and effectively control pressure, ensuring consistent performance over time.
- Rugged Construction: With fortified posts, straps, and welds, These batteries are built to resist vibration damage and optimize current transfer, ensuring durability and reliability in challenging environments.
- High Density Oxide: Constructed with high-density oxide materials, These batteries deliver maximum power-per-point for exceptional "high cycling" service and longevity.
- Low Self-Discharge Rate: With less than 2% per month self-discharge, These batteries experience minimal deterioration during transport and storage, ensuring readiness whenever needed.
- Easy Transportation: Approved by FAA, IATA, DOT, and UPS, These batteries are designed for easy travel and shipping, providing convenience and compliance with regulations.
- Maintenance-Free Operation: These batteries are completely maintenance-free, ensuring hassle-free performance and consistent reliability for long-term use.
- In-House Tested Valve Design: Each battery undergoes rigorous in-house testing to ensure 100% reliability of the specialized valve design, enhancing overall safety and performance.
- Forged Terminals and Bushings: With forged terminals and bushings, These batteries provide assurance against leakage, ensuring reliability and safety in operation. Additionally, These batteries are UL recognized components, meeting industry standards for quality and safety.
Sizing
M50-12 SLD M Sealed AGM Battery by MK Battery | |
Length | 7.83" |
Width | 6.54" |
Height | 6.73" |
Nominal voltage | 12 Volts. |
Nominal capacity | |
20 hour rate (2.5A to 10.50V) | 50 Ah |
10 hour rate (4.75A to 10.50V) | 47.5 Ah |
5 hour rate (8.5A to 10.20V) | 42.5 Ah |
1C (50A to 9.60V) | 28.33 Ah |
3C (150A to 9.60V) | 20 Ah |
Weight | Approx. 33.20 lbs. |
Internal resistance (at 1KHz) | Approx. 5 mΩ |
Maximum discharge current for 5 seconds | 600 A |
Operating temperature range | |
Charge | -15°C (5°F) to 40°C (104°F) |
Discharge | -15°C (5°F) to 50°C (122°F) |
Storage | -15°C (5°F) to 40°C (104°F) |
Charge retention (shelf life) at 20°C (68°F) | |
1 month | 98% |
3 months | 94% |
6 months | 85% |
Charging methods at 25oC (77oF) | |
Cycle Use | Charging Voltage 14.4 to 15.0V |
Coefficient -5.0mv / °C / cell | |
Maximum Charging Current : 15A | |
Standby Use | Float Charging Voltage 13.50 to 13.80V |
Coefficient -3.0mv / °C / cell | |
Case Material | ABS |
(Option : UL94 HB Flame Retardant) | |
Terminal | F8 |
Description of torque value of hardware for the terminals: | |
Recommended torque value | M6: 5.39 N-m |
Maximum allowable torque value | M6: 8.82 N-m |
Documents
Warranty
- The manufacturer will replace the battery with a free equivalent if it fails due to defects in materials or workmanship within 13 months from the date of the initial installation.
- A battery used in a mobility application rated lower than 20 amp hours will be replaced with a free equivalent if it fails due to defects in materials or workmanship within 6 months from the date of installation.
- Proof of date of purchase/installation required for all claims.
- Upon receipt of the defective battery, manufacturer will process the claim and reimburse for any direct freight costs.
- Warranty does not cover failures in service due to the following conditions:
- Normal "wear and tear".
- Unauthorized modifications or alterations to the products.
- Negligence, accident, abuse, misuses including improper jump starting, or improper, unsuitable or abnormal storage of the products.
- Improperly installed or applied batteries. Improperly charged (either under or over) batteries. Opening of batteries that are designed and intended in use as sealed products.
- Physical damage due to acts of nature or man which stress products beyond design limits or other undesirable influences.
- Manufacturer considers AGM batteries to be suitable for light duty mobility equipment only. AGM batteries used in more robust applications such as complex rehab mobility devices, where daily deep discharges are the norm, may void the warranty.
- Any storage of batteries shall be at an ambient temperature of 77°F or less and user shall give a freshening charge to all batteries every 6 months.
- Manufacturer shall not be liable for consequential, incidental, special or direct damages, whether the claim for any such damages is based on warranty, tort, contract, or otherwise.
- Any labor cost for service under warranty is not covered as per our terms of sale.
- Standard manufacturer terms & conditions are applicable for warranty for this product.
Please call us for specific details.
Returns
- Products return policy is applicable as per the standard manufacturer terms & conditions provided.
Please call us for specific details.