Sleepnet MiniMe 2 Pediatric Nasal Mask Headgear is latex free.
Features
- Extra-small/Small : 14" to 21" Head Circumference
- Large/Extra-Large : 19" to 25" Head Circumference
Headgear Adjustment Tips :
Follow these steps when connecting and adjusting the Headgear for the MiniMe 2 nasal mask.
- Begin by pulling the headgear out of the package. Locate the back of the headgear indicated by the white text.
- Lay the headgear on a flat surface with the blank side facing upward.
- Grasp the mask and lay it in the middle of the headgear. Find the three cutouts located in a triangular shape on the arms of the Touchless Spacebar.
- Thread one of the top straps through the cutout by sending the hook and loop tab under the mask, through the hole, and over the arm of the spacebar.
- Secure the hook and loop tab onto the headgear strap. Please Note: The strap will be adjusted after the mask is in place. Do not worry about tightening the strap at this time.
- With one secured strap and three dangling straps, move the mask to cover the face. To ensure proper placement, make sure the secured headgear strap is set high on the user's forehead. The additional headgear straps should be behind the user's head.
- Begin to secure the other straps by pulling the material through the cutout and fastening the hook and loop tab over the support arms onto the strap.
- With the user's nose comfortably seated in the nasal mask, hold the mask in place with one hand. Use the other hand to make adjustments to each of the straps.
- It is safe to begin therapy once the optimal fit has been obtained.