Ablenet Jelly Beamer Twist Transmitter

Ablenet Jelly Beamer Twist Transmitter is designed to provide reliable and rapid access to the switch without the use of cords. Multiple Jelly Beamers can be used in the same room at the same time, from distances as far as 30 feet, without interference. Jelly Beamer Wireless Switch has an external switch jack, allowing you to connect any single switch to the wireless receivers.

Features of Jelly Beamer Transmitter:

• Batteries included
• 2.5 inch switch activation surface
• Tactile, visual and audible feedback
• Long battery life with built-in sleep mode
• No pointing required for the 30-foot of range
• Requires the Original Wireless Receiver
• Multiple Switch tops included: Red, Yellow, Green, Blue
• Unique wireless codes to eliminate cross-talk between devices

• Manufacturer provides “Two year limited warranty” against defects in materials and manufacturing form the date of purchase.
• The limited warranty is not transferable and is only offered to the first customer who purchases the product.
• Defects or damage that result from: improper operation, storage, misuse or abuse, accident or neglect, contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; subjecting the products to abnormal usage or conditions; or other acts which are not the fault of manufacturer, are excluded from coverage.
• The warranty does not extend to non-durable components, such as rubber accessories, casters, and grips, which are subject to normal wear and need periodic replacement.
• Parts under warranty will be covered at no cost.
• Any labor cost for service under warranty is not covered as per our terms of sale.
• Standard manufacturer terms & conditions apply for warranty of this product.

• We gladly accept returns within 30 days from the date of shipment for a full refund. Unfortunately, we are unable to process returns beyond this timeframe.
• To ensure a smooth return process, all items must be returned in their original condition and packaging.
• A Returned Goods Authorization (RGA) number is required before sending back any item. This helps us process your return efficiently.
• Items must be new, unused, and untampered to qualify for a refund. Customers are responsible for return shipping costs.
• If a return is not due to a manufacturing defect, any applicable payment processing fees (credit card/PayPal) will be deducted from the refund.
• This product is subject to the standard return policy set by the manufacturer.

If you have any questions or need assistance with your return, our team is happy to help. Please contact us for further details.

Q: Can the batteries be replaced?
A: The Jelly Beamer uses 2 AA batteries (alkaline recommended).

When the batteries are low, the LED will flash three (3) times. It’s recommended at this point to replace the batteries.

Q: What is the proper storage procedure for this device?
A: If the device isn’t being used for long period of time, we recommend removing the batteries and storing it in a cool, dry place. This will ensure that it doesn’t become damaged by corrosion when not being used.

Q: How to Connect a Jelly Beamer Transmitter?
A: The Jelly Beamer is a wireless switch that brings reliable, immediate switch access without the hassle of cords. To connect to the Original Wireless Receiver, follow the steps below:

1. Insert new batteries into the Jelly Beamer Transmitter and Original Receiver.
2. Turn ON both the Jelly Beamer Transmitter and Original Receiver
3. Enter pairing mode by pressing and holding the Test button on the Original Receiver for about 5 seconds or until the LED turns green.
4. Press the switch on top of the Jelly Beamer to link it to the receiver. Please note that you may repeat this step for additional transmitters (up to 8 transmitters can be paired to a single receiver).
5. Exit pairing mode by pressing the pairing button on the Original Receiver once.

Now your receiver and transmitter are ready to be used!

Q: How do I keep the colored cap firmly in place on the Jelly Beamer Transmitter?
A: To better secure your switchtop to the body of your Jelly Beamer Transmitter, we recommend adding a small amount of semi-permanent adhesive to the threads of the switchtop. This will provide additional resistance to help hold the switchtop in place. Avoid using permanent adhesives, as they may make future removal difficult or damage the device.