AMT Mini ONE Straight Connector is Compatible with the Mic-Key device but not compatible with MINI Classic Buttons. The MiniONE offers all the advantages of the MINI Classic but with more features and greater compatibility. AMTs MiniONE family of low profile G-Tubes, which includes the Balloon, Non-Balloon, and Capsule Non-Balloon devices, are designed to reduce leaks, improve comfort, and improve patient outcomes. These devices sit flush against the skin and can be concealed undergarments easily allowing the patient a wide range of motion. All three devices within the MiniONE Family can use the same style feed sets which offer Glow Green technology.
Features
- Feed Sets are provided sterile.
- Helps caregiver avoid waking patient.
- Feeding port and feed set connectors "Glow Green" in the dark.
- The latest innovation from AMT is to increase patient comfort while improving patient outcomes.
Feed-in an Upright Position and Remain Upright for at Least 30 Minutes After Feeding
- Prime the tubing: Attach the feeding bag tubing to the right angle feeding set and clamp one or both tubes.
- Fill the bag with formula. Unclamp tube(s) and allow the formula to fill tubes. Re-clamp tubing.
- Connect feed set to MiniONE Balloon Button feed port.
- Connect feeding bag tubing to the pump. Set flow rate. Unclamp tubes and begin feeding.
- When feeding is complete, clamp both feed set tubing and feeding bag tubing, then disconnect the feeding bag.
- Flush feeding set with a prescribed amount of water (5ml for children, 10-20ml for adults).
- Disconnect the feeding set and wash it with warm soapy water.
Bolus Feeding Using a Catheter Tip Syringe
- Prime the tubing: Attach a water-filled catheter tip syringe to the bolus feeding set and fill it with water. Clamp the feeding set.
- Connect feeding set to MiniONE Button feeding port.
- Disconnect syringe from feeding set and remove syringe plunger. Reattach syringe without the plunger.
- Slowly pour formula into a syringe and unclamp the feeding set. Keep syringe filled with a formula to prevent air from entering the stomach. To adjust the feeding flow rate, raise or lower the syringe.
- When feeding is complete, flush the feeding set and button with the prescribed amount of water (5ml for children, 10-20ml for adults).
- After flushing, disconnect the feeding set and wash it with warm soapy water.