Atos Provox Silicone Glue | Stoma Care Supplies

The Provox Silicone Glue is a specialized medical adhesive designed to improve the bond between Provox Adhesive base plates and the skin around the tracheostoma. With its easy-to-use brush cap applicator and skin-friendly formulation, it helps reinforce attachment for more reliable wear and comfort. Intended for single-patient use, this glue supports daily stoma care with convenience and confidence.

Features & Benefits:

• Improved Adhesion—Strengthens the attachment between Provox Adhesive base plates and intact skin.
• Convenient Bottle Design – Supplied in a 30 mL bottle with a brush cap for controlled, multiple applications.
• Skin-Safe Application—Designed for use on clean, intact skin around the tracheostoma.
• Single-Patient Use—Non-sterile, safe for repeated use by one patient.
• Residue Removal Options – Residual glue can be safely removed with Provox Adhesive Remover tissues.

Usage Guidelines:

1. Before First Use
   • Push down and unscrew the transport cap.
   • Replace with the enclosed brush cap and close securely.
2. Application
   • Clean and dry the skin around the stoma.
   • For added protection, prepare skin with Provox Skin Barrier if needed.
   • Remove excess glue from the brush and apply a thin, even layer on the skin.
   • If necessary, apply a second layer.
   • Allow the glue to dry for 3–4 minutes before attaching a Provox Adhesive base plate.
   • Close the cap securely after use to minimize evaporation.
3. Removal
   • Wait for the adhesive to detach naturally.
   • If removal is difficult, use Provox Adhesive Remover tissues to remove both the adhesive and any residual glue.

Precautions & Warnings:

• Avoid deep inhalation of solvent, and prevent glue from entering the tracheostoma.
• For external use only; do not apply on damaged skin, mucous membranes, or open wounds.
• Stop use if irritation or discomfort occurs around the tracheostoma. If symptoms persist, consult your physician.
• Keep out of reach of children.
• Do not use if the brush cap shows damage.
• In case of eye contact, carefully remove glue with a cloth, flush with water for at least 15 minutes, and seek medical attention if irritation continues or vision changes.
• Follow medical practice and national biohazard disposal requirements for used medical devices.