CiDehol ST 70% Isopropyl Alcohol Surface Disinfectant Cleaner is a sterile, ready-to-use 70% Isopropyl Alcohol (IPA) solution designed for critical cleaning and disinfection in pharmaceutical, biotechnology, and medical device cleanroom environments. Formulated with USP-grade Water-For-Injection (WFI), it is filtered to 0.2 microns, double-bagged, and gamma-irradiated to ensure a sterility assurance level (SAL) of 10⁻⁶.

CiDehol ST is manufactured and packaged in an ISO 5 cleanroom and undergoes a rigorous USP 14-day sterility test and LAL bacterial endotoxin testing. Each case is shipped with complete traceable, lot-specific documentation for full regulatory compliance and peace of mind.

Features:

• Meets WFI endotoxin level criteria of <0.25 EU/mL
• EPA-registered disinfectant for critical cleanroom environments
• Filtered to 0.2 microns and gamma-irradiated for maximum sterility
• Supplied with full lot-specific documentation for traceability and compliance
• Undergoes 14-day USP sterility testing and bacterial endotoxin (LAL) testing
• Ready-to-use formula eliminates dilution errors and reduces contamination risk
• Packaged in ISO 5 cleanroom conditions and double-bagged for cleanroom entry
• Sterile 70% Isopropyl Alcohol (IPA) solution made with USP-grade Water-For-Injection (WFI)

Ingredients:

• Isopropyl Alcohol, USP 70.00%
• Water-for-Injection, USP 30.00%

Precautionary Statements:

• Avoid eye and skin contact and ingestion.
• Flammable - Do not come in contact with flame or extreme heat.

Disinfection:

• Use this product while wearing personal protection.
• Wear protective eyewear such as goggles or face shield, protective clothing and chemically resistant gloves.
• Use with adequate ventilation and spray away from eyes and face.
• CiDehol ST is ready to use.
• Do not dilute.
• Pre-clean surface or item of heavy soil or gross filth before application.
• Hold container upright, 6 - 8 inches from surface.
• Spray product on surface and allow to remian wet for a minimum of 10 minutes.
• Allow surface to air dry, or after 10 minutes wipe dry with sterilized cloth, wiper, if needed.

Sanitation:

• Uses 5 minute contact time on hard, non-porous surfaces (made from: stainelss steel, glass, Corian, laminate flooring, aluminum, pvc, mild steel, polpropylene), in isolators, cleanrooms, sterile and controlled areas, gowning rooms and on process lines, gloves, work surfaces, tools, and equipment.
• CiDehol ST is an effective sanitizer on inanimate, non-food contact surfaces against Staphylococcus aureus (ATCC #6538) and Enterobacter aerogenes (ATCC #13048) in the presence of 5% fetal bovine serum organic load of 5 minutes.