Comfort Company Acta-Embrace Anti Thrust Cushion

Comfort company Acta-Embrace anti thrust foam cushion is constructed of high strength, lightweight aluminum. Anti-thrust embrace cushion provides anterior pelvic build-up to prevent forward migration. Anti thrust embrace cushion has dynamic nature of input which provides positioning support while allowing for movement. This embrace cushion offers two type of fabric covers for more comfort and support.

Cushion cover options:

Stretch-Air - These are latex free covers are designed for patient comfort and heat dissipation. This two-ply material combines a soft and high-stretch Polyester top layer with a waterproof Polyurethane barrier underneath providing additional incontinence protection.

Comfort-tek - It is designed with a Polyurethane material for infection control and as an incontinence barrier, has a smooth and extremely soft top layer with a high-stretch Polyester backing. It is an easy to clean surface and can be cleaned using most common disinfectants. It is Latex free. Comfort-tek fabric is fluid proof exterior which has supple leathery properties that provide an easily cleaned surface and protection for the inner cushion.

A new cover option adapted from leading prosthetics technology, GlideWear is designed to promote healing and reduce the risk of Decubitus Ulcers through the use of the Shear Reduction Zone. The GlideWear technology option is available as an embedded upgrade to Stretch-Air & Comfort-Tek fabric options.

GlideWear provides:

• Improved comfort from reduced friction
• 100% breathability for microclimate control
• Reduction of shear forces to increase skin protection

Features

• Deep lateral and medial leg contours promote postural alignment
• Tapered leg adductors increase in width near the back of the cushion to give support to the greater trochanters
• Two layers of foam, a contoured molded base, foam with a layer of memory foam for comfort and skin protection

Skin protection primary performance metrics categorizing cushions

Stability and balance primary performance metrics categorizing cushions

ISO standards should be referenced for more information on the test methods

Immersion ISO 16840-2:2018 Clause 11: a test to evaluate a cushion's ability to immerse the buttocks

Contact area ISO 16840-6:2015 Clause 14: a test that utilizes interface pressure measurements to assess the magnitude and distribution of pressure on a loaded cushion

Off-loading IT ISO 16840-12:2021: a test to evaluate a cushion's ability to conform to the contour of the body (i.e. immerse and envelop the buttocks). Explore this test's assessment of pressure distribution.

Lateral stability ISO 16840-13:2021: a test that characterizes a cushions' ability to resist lateral leans

Horizontal stiffness/forward stability ISO 16840-2:2018 Annex C: a test to evaluate the cushion's response to slight horizontal movements in the forward direction

Please call us to configure custom cushion size.
Custom and Non-Standard size cushions ordered are not returnable.

• The Comfort Company holds a lifetime warranty policy for all products.
• If a manufacturers’ defect occurs, the product will be replaced at no cost to the buyer.
• Parts under warranty will be covered at no cost.
• Any labor cost for service under warranty is not covered as per our terms of sale.
• Standard manufacturer terms & conditions are applicable for warranty of this product.

• All items being returned to the manufacturer require a Return Authorization Number (R.A.) and no returns will be accepted without an R.A.
• The products must be new, unused condition, not tampered with, in original packaging and returned at the customer's expense in the original packaging.
• There will be 15% Restocking Fee for all merchandise returned within Three months of the invoice date.
• No returns will be accepted after three (3) months.
• If any product for which the purchaser demands rerouting before delivery, there will be a 25% restocking fee for all merchandise that is rerouted.
• No restocking fee will be charged if an error by manufacturer resulted in shipment of product that did not conform with the order received.
• Once a non-standard item has been started in production, Manufacturer does not allow cancellations.
• Manufacturer reserves the right to determine condition and salability of products returned.
• Custom orders are non-refundable and non-returnable
• No returns accepted for Hygiene & Bath products due to health concerns
• If your return is not due to any manufacturing defect then the original shipping cost and credit card/paypal processing fee will be deducted from the total refund
• Standard Manufacturer Terms & Conditions Apply for Return Policy of this Product

Please call us for Specific Details.