Courtney Enclosed Canopy Bed

Courtney bed's bedframe is hand-crafted from solid hardwood, there is no metal, PVC, or any other material used in fabrication. The sidewalls are made with a heavy-weight material that has a high burst rating, is super flexible, and is very easy to wash. All sidewalls are independent of one another and can be taken out separately. Courtney's bed is supplied with an 8" memory foam medical mattress, custom-made to fit perfectly inside the bedframe. This precision-fit mattress prevents borrowing and eliminates the risk of entrapment. The sub-frame and mattress boards provide a rugged platform for those that have a need to jump or bounce. With the combination of the sidewall panels and mattress, the Courtney Bed design addresses the 7-Zones of Entrapment identified by the FDA and is FDA approved as a Class I manual hospital bed.

• Alzheimer’s Disease
• Angelman Syndrome
• Autism
• Cerebral Palsy
• Creutzfeldt-Jakob Disease
• Dementia
• Down Syndrome

• Epilepsy
• Huntington’s Disease
• Kluver-Buct Syndrome
• Lennox-Gastaut Syndrome
• MECP2 Duplication Syndrome
• Pitt-Hopkins Syndrome
• Rett Syndrome

• Hand-crafted from solid hardwood
• Outside dimensions: 85" L x 39" W x 75" H
• Sleeping area dimensions: 80" L x 36" W x 51" H
• Solid mattress platform with no moving parts (no option for articulation)
• Can be stained in 3 different color options, no additional fee

Beds are made with natural wood veneers:

• Made from heavy-weight, water-resistant/repellant canvas... double and triple stitched
• Windows are made from a heavy-duty knit mesh... flexible, yet very strong
• Enclosure panels are independent of one another, can be removed individually
• Vertical bumpers cover the four corner posts of the bed frame, no wood is exposed inside our bed
• A top mesh panel is available (bed does not come standard with a top)
• 12 color options available, no additional fee

• Pressure reducing memory foam
• Fits firmly and precisely into the bed frame
• Overall dimensions: 80" L x 36" W x 8" H
• Top of the mattress height from the floor is 24"
• Cover is fire retardant, fluid resistant, and removable

• Enclosure consists of 4 independent panels
• Panels can be removed individually for cleaning or replacement
• If safety enclosure is no longer required, front panel can be removed to provide a 3-sided day bed

• Tabs on each panel create the ability to adjust the desired tension/tautness of individual panels

• There is 11.5″ of space between the floor and bottom
• There is 70.5″ of height between the floor and the top bed rail
• This allows room to utilize many personal lifting devices

• Mattress height is 24″ from the floor
• Allows easy transfers

• Zone 1: Within the rail
• Zone 2: Under the rail, between the rail supports, or next to a single rail support
• Zone 3: Between the rail and the mattress
• Zone 4: Under the rail, at the ends of the rail
• Zone 5: Between split bed rails
• Zone 6: Between the end of the rail and the side edge of the headboard or footboard
• Zone 7: Between the headboard or footboard and the mattress end

• Top Mesh Panel can be added to any Courtney Bed with initial assembly or any time after
• This option will fully enclose the bed
• Same mesh as the enclosure panels to allow air flow
• Securely holds panels between two bed frame members

• Same as the original top panel but includes access for camera

• Access Grommets provide access into the sleeping area for tubing without compromising the safety and security of the enclosure
• Access Grommets can be added to any Courtney Bed during manufacturing
• If required later, individual panels can be replaced with ones including Access Grommets
• Access Grommets are installed in both the head and foot panels of the bed
• Special requests for additional Access Grommets or locations can be accommodated

• Exterior Padding can be added to any Courtney Bed with initial assembly or any time after
• Full and partial bed coverage available
• 12 color options available

• Zippered Back Panel option provides a second zippered access panel into the bed
• This provides access from both the front and back of the bed
• Zippered Back Panel can be added during manufacturing

• 13″ mattress height
• Provides the option to crawl into the bed
• Bed posts can be replaced later if standard height is desired
• Accommodates low ceiling height
• Sleeping area remains the same size as the standard bed

• Casters retract allowing the bed to sit firmly on the legs when not engaged
• No wheel locks to disengage, break, wear out
• Easily engaged to allow bed to be moved around the room
• Can be added at anytime
• Not available on Low Bed Height frames