EasyStand Bantam Sit-to-Stand And Supine Stander, Medium

EasyStand Bantam Medium incorporates elements from both the Bantam and Evolv models. Children find it harder to transfer as they become older, which makes sticking to a standing program more difficult. Transferring to a seated or supine posture, or any position in between. Bantam medium base and Bantam medium supine ready base are the two base options available.

When ordered supine, the pow'r up option allows a user to freely go from sitting to standing. The position "Sit to Stand" is just one of numerous options. The central positioning controller, which gives you control over how the unit changes position. Easystand Bantam Medium Stander from Altimate Medical has approximate height range of 48"-66" and supports up to 200 lbs. of weight.

Neutral Mode:

• The controller should only be set in the neutral position when changing between the sit to stand and supine positioning modes. .

• Do not leave the controller in neutral position with a person in the Bantam. The unit is not providing the user any support when in neutral mode.

• The neutral position allows the foot bracket supports, and the back support to move freely at the hip and knee pivot points. .

Sit-to-Stand Mode:

• The unit is locked into sit to stand mode when the foot bracket is locked to the base frame.
• Please note that even though the controller is set to sit to stand mode, the foot plate bracket must be brought perpendicular to the floor and locked into place. If the bracket is not already in position this can be accomplished by:.
  • Pushing the back all the way forward to the end of its range (approximately 90 upright)
  • Pushing the footplate bracket all the way down and backward toward the base to the end of its range.
• Listen for a clicking sound to indicate that the unit is locked into sit to stand mode.
• If you can move the back support, or foot supports forward or backward, the unit is not yet locked in sit to stand mode.
• The sit to stand mode allows the user to move between sitting and standing positions. The hip and knee pivot points articulate while maintaining constant angles for the back and foot support bracket..

Supine Mode:

• The unit is locked into supine mode as soon as the controller is set in that position.
• The hip and knee pivot points are locked at the determined angle and will not articulate further until Supine mode is disengaged. The user can be elevated to a more upright position or descended to more reclined position while the unit is in supine mode.
• If the unit is locked in supine mode, you must only elevate the unit to the point where footplate bracket comes perpendicular to the floor. DO NOT CONTINUE TO ELEVATE THE UNIT PAST THIS POINT. Forcing the unit to elevate past its stopping point could result in a damage and injury.
• When in supine mode, if the limit is reached where the foot bracket is perpendicular to the floor, but the user wishes to continue to a straighter standing position you must change the controller to sit to stand mode. This will allow the user to continue toward upright standing without damaging the unit.