Everest & Jennings Cup Holder

Everest & Jennings cup holder can be easily adjusted and snapped by tension clip-ons onto walkers, rollators, wheelchairs, transport chairs, quad and standard canes with tubing diameter from 5/8" to 1". Everest & Jennings multi purpose cup holder is a tension adjustable clamp bottle holder united to a 3½" diameter shelf base.

Features

• Total product weight: 2.6 ounces
• Product dimensions: 3" x 3½" x 3"
• Evenly distributed – Maximum diameter 2.5" to 3"
• 3½" diameter composite shelf base to support bottle
• Frame made with durable high-density polypropylene
• Weight capacity: bottled beverage containers from 8 to 20 oz
• Fits 2½" - 3" diameter bottles (holder can be adjusted to fit bottle size)
• Tension adjustable clamp bottle holder by two screws securing two metal clip-on

Six (6) months

• Entire warranty, exclusive remedy and consequential damages disclaimer this warranty is manufacturer's only warranty and is in lieu of all other warranties, express or implied.
• This warranty is limited to the repair or replacement of the defective parts. shall not be liable for and hereby disclaims any direct, special, indirect, incidental, exemplary or consequential damages, including, but not limited to: damages for loss of profits or income, loss of use, downtime, cover, or employee or independent contractor wages, payments and benefits.
• This device was built to exacting standards and carefully inspected prior to shipment.
• This warranty is an expression of confidence in the materials and workmanship and assurance to the consumer of years of dependable service.
• Warranty Exclusions -
  • Defects, damage, or other conditions caused, in whole or in part, by misuse, abuse, negligence, alteration, accident, freight damage, tampering or failure to seek and obtain repair or replacement in a timely manner
  • Products which are not installed, used, or properly cleaned and maintained as required in the official manual for the applicable product
  • Products considered to be of a non-durable nature including, but not limited to: casters, filters, fuses, gaskets, lubricants, and charts
  • Accessories or parts not provided by manufacturer
  • Charges by anyone for adjustments, repairs, replacement parts, installation or other work performed upon or in connection with such products which are not expressly authorized in writing, in advance, by manufacturer
  • Any labor or shipping charges incurred in the replacement part installation or repair
  • Costs and expenses of regular maintenance and cleaning
  • Representations and warranties made by any person or entity other than manufacturer
• Parts under warranty will be covered at no cost. Any labor cost for service under warranty is not covered as per our terms of sale.
• The product warranty is applicable as per the terms and conditions given by the product manufacturer.

Please call us for specific details.

• Under no circumstances will manufacturer accept a returned product more than Thirty (30) days after the shipment date.
• Valid returns may be returned to manufacturer only when a Customer Service Representative issues a Return Merchandise Authorization (RMA).
• We do not guarantee fulfillment of any desired purpose or product suitability to the user and this will not be considered as a valid reason for return.
• All returns must be sent to the specific location indicated by manufacturer, in the same quantity as that sent in the original unopened box, properly packaged, and prepaid (F.O.B. manufacturer indicated warehouse).
• Refused orders or requests for returns due to customer error are subject to a service charge of 25% or $10, whichever is greater. The customer is responsible for all outbound and return freight charges.
• All returns are subject to inspection. Manufacturer will determine, in its sole discretion, whether an item qualifies as a warranty item and whether to repair or replace the item.
• The products must be new, unused condition, not tampered with, in original packaging and returned at customer's expense in original packaging.
• If your return is not due to any manufacturing defect then the original shipping cost and credit card/paypal processing fee will be deducted from the total refund.
• All freight charges, fuel surcharges, handling fees and additional freight services are non-refundable.
• "No returns accepted for Hygiene & Bath products due to health concerns, No Exceptions."
• Custom orders are non-refundable and non-returnable.
• Following products are strictly not returnable:
  • Patient lifts
  • Sterile products
  • Discontinued items
  • Private label goods
  • Pedigreed products
  • Clinical care recliners
  • Products with expiration dates
  • Products that may not be returned to stock for hygienic reasons
  • Products requiring special handling or storage such as temperature or humidity requirements
  • Special orders (any item not ordinarily stocked by Manufacturer, including those items that manufacturer has stocked in an excess quantity in order to meet the requested needs of the Buyer; Long Term Care beds; case goods, furniture; wall coverings; floor coverings; window treatments; lighting, art, room accessories and the Hausted product line
• Standard manufacturer terms & conditions are applicable for return policy of this product.

Please call us for specific details.

Q. Will the Everest & Jennings Cup Holder fit on my wheelchair or walker?
A. Yes, it clips onto tubing 5/8" to 1" in diameter and fits most wheelchairs, walkers, rollators, transport chairs, and canes.

Q. What size bottles can I use with this E&J cup holder?
A. It holds containers 2½" to 3" in diameter, including 8 oz to 20 oz bottles, mugs, or cans.

Q. Does the E&J bottle holder hold the drink firmly while moving?
A. Yes, the clamp and 3½" base keep bottles stable during movement.

Q. Can I remove this portable drink holder by E&J easily for storage or cleaning?
A. Yes, it detaches easily and wipes clean for simple maintenance.

Q. How much does the cup holder by graham field weigh? Will it make my walker heavier?
A. It weighs only 2.6 oz, adding no noticeable weight.

Q. What material is the graham field cup holder made of? Is it durable for outdoor use?
A. Made of high-density polypropylene, it’s durable for indoor and outdoor use.

Q. Can I use it for hot drinks like coffee or tea?
A. Yes, it fits insulated mugs up to 3" wide. Use caution with hot liquids.

Q. Is this a universal cup holder, or only for Everest & Jennings equipment?
A. It’s universal and fits most mobility aids with compatible tubing.