


Exofin 2-Octyl Cyanoacrylate Skin Adhesive Precision Applicator Tip
PayPal Pay Later
Starts From
Description
Exofin Skin Adhesive with Precision Applicator Tip is a medical-grade, high-viscosity 2-octyl cyanoacrylate skin closure adhesive packaged with a precision applicator tip for controlled, accurate application during wound closure procedures. This topical tissue adhesive helps approximate clean skin edges quickly and forms a flexible microbial barrier, making it suitable for closing minor lacerations and surgical incisions where traditional sutures may not be necessary.
Features:
- High-viscosity 2-octyl cyanoacrylate formulation: Offers one of the strongest and most flexible adhesive bonds available for topical wound closure.
- Precision applicator tip: Designed for controlled and accurate delivery of adhesive, reducing waste and improving placement.
- Fast polymerization: Sets rapidly (typically in under 30 seconds), helping speed clinical procedures.
- Creates a microbial barrier: Forms a protective film over approximated skin edges to help reduce contamination risks during healing.
- Clear applicator: Transparent tip allows clinicians to observe adhesive flow before placement.
Indications:
- It is intended for topical application only to hold closed easily approximated skin edges of wounds from surgical incisions, including incisions from minimally invasive surgery, and simple, thoroughly cleansed, trauma-induced lacerations.
- It may be used in conjunction with, but not in place of, deep dermal sutures.
Contraindications:
- Do not use on any wound with evidence of active infection, gangrene, or wounds of decubitus etiology.
- Do not use on mucosal surfaces or across mucocutaneous junctions (e.g., oral cavity, lips), or on skin which may be regularly exposed to body fluids or with dense natural hair, (e.g., scalp).
- Do not use on patients with a known hypersensitivity to cyanoacrylate or formaldehyde, or benzethonium chloride.
Directions to use:
- Before applying adhesive, the incision or trauma site must be thoroughly cleaned and dried. Make sure the wound edges are easily approximated.
- Tighten the pre-assembled Applicator Tip clockwise onto the threaded tube until it is snug and seated. Once seated, the applicator will puncture the tube's foil membrane, allowing the adhesive to pour through.
- Squeeze the tube's bottom at the "X" while holding it horizontally. Continue moving the glue up the tube until it reaches the clear applicator tip.
- Begin immediately applying exofin to the wound site. Continue to move the adhesive up the tube while brushing in a back and forth motion "painting the surface" until it is entirely covered. If other spots require adhesive, proceed to those locations and repeat.
- The adhesive should be tack-free about 30 seconds after application, but this depends on the thickness of the sticky coating. To avoid thick margins that may result in unintended bond breakdown, take care to generate a smooth, even coating of adhesive.
- Once the adhesive has completely polymerized (non-tacky), you can apply a secondary bandage to the location. If you use a secondary bandage, make sure it is fully tack-free before applying it to the adhesive region. Applying when tacky may cause adhesive loss while removing the secondary bandage, as well as dehiscence of the wound.
Warranty
- The product warranty is applicable as per the terms and conditions provided by the product manufacturer.
Please call us for specific details.
Return
- No returns will be accepted after 30 days from the date of shipment.
- All returns are subject to a restocking fee as per manufacturers terms and conditions.
- All returns must have an RGA number (Returned Goods Authorization), unauthorized returns will not be accepted.
- We do not guarantee fulfillment of any desired purpose or product suitability to the user and this will not be considered as a valid reason for return.
- The products must be new, unused condition, not tampered with, in original packaging and returned at the customers expense in the original packaging.
- If your return is not due to any manufacturing defect then the original shipping cost will be deducted from the total refund.
- Hygiene, bath and toilet items cannot be returned once opened or used.
- Standard manufacturer terms and conditions apply for return policy of this product.
Please call us for specific details.
Resources
Description
Exofin Skin Adhesive with Precision Applicator Tip is a medical-grade, high-viscosity 2-octyl cyanoacrylate skin closure adhesive packaged with a precision applicator tip for controlled, accurate application during wound closure procedures. This topical tissue adhesive helps approximate clean skin edges quickly and forms a flexible microbial barrier, making it suitable for closing minor lacerations and surgical incisions where traditional sutures may not be necessary.
Features:
- High-viscosity 2-octyl cyanoacrylate formulation: Offers one of the strongest and most flexible adhesive bonds available for topical wound closure.
- Precision applicator tip: Designed for controlled and accurate delivery of adhesive, reducing waste and improving placement.
- Fast polymerization: Sets rapidly (typically in under 30 seconds), helping speed clinical procedures.
- Creates a microbial barrier: Forms a protective film over approximated skin edges to help reduce contamination risks during healing.
- Clear applicator: Transparent tip allows clinicians to observe adhesive flow before placement.
Indications:
- It is intended for topical application only to hold closed easily approximated skin edges of wounds from surgical incisions, including incisions from minimally invasive surgery, and simple, thoroughly cleansed, trauma-induced lacerations.
- It may be used in conjunction with, but not in place of, deep dermal sutures.
Contraindications:
- Do not use on any wound with evidence of active infection, gangrene, or wounds of decubitus etiology.
- Do not use on mucosal surfaces or across mucocutaneous junctions (e.g., oral cavity, lips), or on skin which may be regularly exposed to body fluids or with dense natural hair, (e.g., scalp).
- Do not use on patients with a known hypersensitivity to cyanoacrylate or formaldehyde, or benzethonium chloride.
Directions to use:
- Before applying adhesive, the incision or trauma site must be thoroughly cleaned and dried. Make sure the wound edges are easily approximated.
- Tighten the pre-assembled Applicator Tip clockwise onto the threaded tube until it is snug and seated. Once seated, the applicator will puncture the tube's foil membrane, allowing the adhesive to pour through.
- Squeeze the tube's bottom at the "X" while holding it horizontally. Continue moving the glue up the tube until it reaches the clear applicator tip.
- Begin immediately applying exofin to the wound site. Continue to move the adhesive up the tube while brushing in a back and forth motion "painting the surface" until it is entirely covered. If other spots require adhesive, proceed to those locations and repeat.
- The adhesive should be tack-free about 30 seconds after application, but this depends on the thickness of the sticky coating. To avoid thick margins that may result in unintended bond breakdown, take care to generate a smooth, even coating of adhesive.
- Once the adhesive has completely polymerized (non-tacky), you can apply a secondary bandage to the location. If you use a secondary bandage, make sure it is fully tack-free before applying it to the adhesive region. Applying when tacky may cause adhesive loss while removing the secondary bandage, as well as dehiscence of the wound.
Warranty
- The product warranty is applicable as per the terms and conditions provided by the product manufacturer.
Please call us for specific details.
Return
- No returns will be accepted after 30 days from the date of shipment.
- All returns are subject to a restocking fee as per manufacturers terms and conditions.
- All returns must have an RGA number (Returned Goods Authorization), unauthorized returns will not be accepted.
- We do not guarantee fulfillment of any desired purpose or product suitability to the user and this will not be considered as a valid reason for return.
- The products must be new, unused condition, not tampered with, in original packaging and returned at the customers expense in the original packaging.
- If your return is not due to any manufacturing defect then the original shipping cost will be deducted from the total refund.
- Hygiene, bath and toilet items cannot be returned once opened or used.
- Standard manufacturer terms and conditions apply for return policy of this product.
Please call us for specific details.
Resources
Starts From
