Mallinckrodt Hygrobac Heat Moisture Exchanger With Electrostatic Filter

Mallinckrodt Heat and Moisture Exchanger with Electrostatic Filter is designed to increase the resistance to gas flow to assist with breathing while protecting against transmission of microorganisms for mechanically ventilated patients. Heat Moisture Exchangers are used to bypass the upper airway when a patient is under anesthesia or in an intensive care setting. The Electrostatic Filter controls or traps moisture and retains a portion of the patient's exhaled breath and humidifies it to prevent colonization in the breathing tube. This Electrostatic Filter uses positive charges to attract particles and negative charges to capture particles to effectively remove bacteria to protect the patient's airway and prevent infection.

For adult (recommended tidal volume >150 ml)

For infant (recommended tidal volume 20 - 70 ml)

Sizes:

Small, Adult/Pediatric: 15m Connection Type, 51ml Dead Space, Without Port

Small, Pediatric/Neonatal: 30 to 100 mL, With Connection

Large, Adult/Pediatric: 15m Connection Type, 84ml Dead Space, Without Port, 300-1500 mL

Features:

• Single Patient Use
• Intended to be replaced at least once every 24 hours
• Protects against microbes as small as 0.02µ.
• Bacterial/Viral filtration efficiency: >99.99%
• Low resistance to airflow reduces work of breathing.
• End tidal CO2 sampling port offers convenient access to airway gases.
• ISO standard 15 mm and 22 mm fitting connects with breathing system.
• Hygroscopic membrane traps patient?s moisture providing effective airway humidification.
• On anesthetized patients and respiratory care patients who require a breathing circuit
• Effective moisture control reduces the risk of colonization in breathing tubes and reduces sampling line blockage.
• Combined filter / HME reduces set up time, and reduces dead space and weight on endotracheal tube and circuit while increasing efficiency.

• The product warranty is applicable as per the terms and conditions provided by the product manufacturer.

Please call us for specific details.

• No returns will be accepted after 30 days from the date of shipment.
• All returns are subject to a restocking fee as per manufacturers terms and conditions.
• All returns must have an RGA number (Returned Goods Authorization), unauthorized returns will not be accepted.
• We do not guarantee fulfillment of any desired purpose or product suitability to the user and this will not be considered as a valid reason for return.
• The products must be new, unused condition, not tampered with, in original packaging and returned at the customers expense in the original packaging.
• If your return is not due to any manufacturing defect then the original shipping cost will be deducted from the total refund.
• Hygiene, bath and toilet items cannot be returned once opened or used.
• Standard manufacturer terms and conditions apply for return policy of this product.

Please call us for specific details.