Neb-u-Lite LX2 Compressor Nebulizer System is intended to provide a source of compressed air for aerosol therapy. The Nebulizer Compressor is used to treat respiratory conditions by converting liquid medication into a mist, making it easier to inhale. It features a compact design and quiet operation, making it convenient for home use. The LX2 has a built-in handle and adjustable nozzle, allowing for easy transport and customization of treatment. It also includes a reusable nebulizer cup and air filter.
Features:
High-quality, low-noise aerosol compressor with user-friendly design.
The piston-driven motor ensures high performance and long life.
Compact design with rounded corners, integrated carrying handle with storage compartment ,and built-in nebulizer holder.
Complete with disposable nebulizer featuring 0.2 ml/min flow rate and 5 ml capacity medicine cup and cleaning/instruction manual.
Each nebulizer comes with:
1 Disposable nebulizer (reusable single patient use)
1 Mouthpiece
1 PVC tubing
1 T adapter
1 Reservoir tube
Intended Use:
Neb-u-Lite LX2 Compressor Nebulizer System is intended to provide a source of compressed air for aerosol therapy. It is used in conjunction with a jet (pneumatic) nebulizer to produce medicated aerosols for inhalation by pediatric and adult patients with respiratory symptoms.
Indications for therapy include asthma, chronic bronchitis, infection of the upper respiratory tract, chronic obstructive pulmonary disease, and other respiratory disorders in accordance with a physician’s prescription. Do not use this product for any other purpose than the preceding. This device can be used with adults or pediatric patients under physician’s prescription.
Cleaning and Maintainance:
Wipe the compressor's outer case with a clean, damp cloth weekly to keep it dust-free. Do not use any powdered type cleaners or soap.
After each use, disassemble the nebulizer cup, T adapter and mouthpiece completely, wash all parts in warm soapy water, and rinse thoroughly. Allow to air dry. Store in a clean, dry location.
Once daily, after washing as above, soak nebulizer components in a fresh solution consisting of one part warm water and one part white vinegar for 30 minutes followed by a warm water rinse. Allow to air dry. Store in a clean, dry location.
Replacing the Filter:
Ensure that ON/OFF switch is in the OFF position. Open the filter cap located next to the ON/OFF switch.
Remove the dirty filter with a small, pointed object. Discard the filter.
Replace with a clean filter.
Replace the filter cap.
Note: Change the filter once every 30 days or when filter turns gray.
Note Do not use cotton or other materials as a filter
Note: Do not wash or clean the filter.
Note: Do not reuse the filter. Do not operate compressor without a filter. Compressor damage can result.
Storage:
Keep the device and accessories dry.
Avoid exposure to direct sunlight.
Sizing
Technical Specifications
Method Of Nebulization
Piston Driven
Power
120VAC, 60Hz
Operating Temperature Range
50°F TO 104°F (10°C TO 40°C)
Operating Humidity Range
10% to 90% RH non-condensing
Storage Temperature Range
-5°F TO 122°F (-15°C TO 50°C)
Storage Humidity Range
10% to 90% RH non-condensing
Weight
4.2 lb (1.91 kg)
Width
6.8"
Height
4.2"
Length
11.7"
Max Pressure (Compressor)
30 psi
Flow Range (Compressor)
0 - 14 liters/min
Particle Size (Nebulizer)
0.5 to 5 microns
Capacity (Nebulizer)
5 ml
Warranty
Five years - Warranty on Compressor
Six months - Warranty on Accessories
Warranty Exclusions - 1) Defects, damage, or other conditions caused by misuse, abuse, negligence, alteration, accident, freight damage, tampering or failure to seek and obtain repair or replacement in a timely manner; 2) Products not installed, used, or properly cleaned and maintained; and 3) Labor or shipping charges. Other exclusions apply.
Entire warranty, exclusive remedy and consequential damages disclaimer this warranty is manufacturer's only warranty and is in lieu of all other warranties, express or implied.
This device was built to exacting standards and carefully inspected prior to shipment.
This warranty is an expression of confidence in the materials and workmanship and assurance to the consumer of years of dependable service.
(1) In the event of a defect covered by this warranty the manufacturer will at its option, repair or replace any defective or nonconforming part or product. OR (2) a credit and/or refund of the original selling price.
Manufacturer’s sole obligation and your exclusive remedy under this warranty shall be limited to such repair, replacement, credit and/or refund.
This warranty does not include any labor charges incurred in replacement part(s) installation or any associated freight or shipping charges to the manufacturer.
The warranty does not extend to non-durable components, such as rubber accessories, casters, and grips, which are subject to normal wear and need periodic replacement.
Parts under warranty will be covered at no cost.
Any labor cost for service under warranty is not covered as per our terms of sale.
The product warranty is applicable as per the terms and conditions given by the product manufacturer.
Please call us for specific details.
Return
No returns will be accepted after 30 days from the date of shipment.
All returns are subject to a restocking fee as per manufacturers terms and conditions.
All returns must have an RGA number (Returned Goods Authorization), unauthorized returns will not be accepted.
We do not guarantee fulfillment of any desired purpose or product suitability to the user and this will not be considered as a valid reason for return.
The products must be new, unused condition, not tampered with, in original packaging and returned at the customers expense in the original packaging.
If your return is not due to any manufacturing defect then the original shipping cost will be deducted from the total refund.
Hygiene, bath and toilet items cannot be returned once opened or used.
Standard manufacturer terms and conditions apply for return policy of this product.