Sani-Cloth Plus Germicidal Disposable Wipes

Sani-Cloth Plus Germicidal Disposable Wipes are designed for use in healthcare settings such as physician and dental offices. These wipes are effective against a broad range of microorganisms, including SARS-CoV-2, and provide a convenient way to clean and disinfect surfaces in one step. Sani-Cloth Plus Germicidal Disposable Cloth is ideal for use in alternate care settings including physician and dental offices. It is effective against 16 microorganisms in 3 minutes.

Features:

• Cleans and Disinfects in One Step: Simplifies the cleaning process, saving time and effort.
• Broad-Spectrum Efficacy: Effective against 16 micro organisms, including SARS-CoV-2, in just 3 minutes.
• Comparable to Competitor Products: Matches the efficacy of other Quat/Low-Alcohol disinfectant products.
• Compatible with Various Surfaces: Suitable for use on a wide range of surfaces and equipment commonly found in healthcare settings.

Instructions for Use:

1. Dispense Wipe: Always dispense the wipe through the lid. Locate the center of the wipe roll, twist the corner of a wipe into a point, and thread it through the hole in the canister lid. Pull through about one inch and replace the lid.
2. Remove Wipe: Cover the opening halfway with one hand. Remove the wipe with a uniform pull, away from face and eyes. Keep the lid closed when not in use to prevent moisture loss.
3. Preparation: If present, remove heavy soil loads prior to disinfecting.
4. Application: Unfold a clean wipe and thoroughly wet the surface. Allow the treated surface to remain wet for three (3) minutes. Let it air dry.
5. Disposal: Do not reuse the towelette. Dispose of the used towelette in the trash. Do not flush in the toilet.

Healthcare Use Sites:

May be used on hard nonporous surfaces of: bed railings, blood glucose meters (glucometers), cabinets, carts, chairs, counters, dental unit instruments trays, exam tables, gurneys, isolettes, IV poles, stethoscopes, stretchers, tables, telephones, toilet seats, diagnostic equipment, patient monitoring equipment, patient support and delivery equipment, and many more.

Sani-Cloth Plus wipes are compatible with:

• Aluminum Alloy 6062
• Steel SAE 1008/1010
• Titanium
• Acrylic
• Polyester (PET)
• Polyethylene
• Polypropylene
• Polystyrene
• Polycarbonate (PC)
• Polybutylene terephthalate (PBT)
• PC-PBT
• PC-PET
• Polyethylenimine (PEI)
• Polyvinyl chloride (PVC)
• Santoprene
• Silicone Rubber
• Glazed Ceramic Tile

Ingredients:

• Water
• Isopropanol
• Butoxyethanol
• Alkyl C12-18 Dimethylbenzyl Ammonium Chloride
• Alkyl C12-18 Dimethyl Ethylbenzyl Ammonium Chloride
• Sodium metasilicate

• The product warranty is applicable as per the terms and conditions provided by the product manufacturer.

Please call us for specific details.

• No returns will be accepted after 30 days from the date of shipment.
• All returns are subject to a restocking fee as per manufacturers terms and conditions.
• All returns must have an RGA number (Returned Goods Authorization), unauthorized returns will not be accepted.
• We do not guarantee fulfillment of any desired purpose or product suitability to the user and this will not be considered as a valid reason for return.
• The products must be new, unused condition, not tampered with, in original packaging and returned at the customers expense in the original packaging.
• If your return is not due to any manufacturing defect then the original shipping cost will be deducted from the total refund.
• Hygiene, bath and toilet items cannot be returned once opened or used.
• Standard manufacturer terms and conditions apply for return policy of this product.

Please call us for specific details.