Sunset Filter and Check Valve Kit for SoClean 2 CPAP Cleaning Device

This is a replacement cartridge kit that works with the SoClean 2 CPAP Cleaner & Sanitizer. The kit includes a filter and a check valve. Both components need to be replaced about every six months to maintain effective and thorough CPAP sanitization. Please note, these items are not made, authorized, or endorsed by SoClean, Inc. The filter and check valve are both items to use when replacing the parts of a SoClean 2 CPAP Cleaning Machine. Properly maintaining your cleaning device with new replacement parts will contribute to the better performance of the cleaning machine.

Features

• Filter Kit: This is an original part for SoClean 2 cleaner and sanitizer machine and includes a replacement filter elements and check valve assembly.
• Guaranteed Compatibility: This kit compatible with SoClean CPAP cleaners with SC1200 serial number.
• Spare needed for proper operation: Cartridge filter converts activated oxygen back to regular oxygen and check valve prevents water in CPAP from damaging electronics.
• Quick and easy installation: it is simple to remove the old filter and replace it with a new one; no need to disassemble the unit
• 6 Month Replacement Recommended: To ensure the protection and effectiveness for SoClean 2 Disinfectant, it is recommended to replace the filter and valve every 6 months.

What’s Included with Sunset Replacement Kit For Filter And Check Valve

• Sunset Solutions Filter (comparable replacement for the SoClean 2)
• Sunset Solutions Check Valve (comparable replacement for the SoClean 2)

Maintenance Of Sunset Check Valve And Replacement Filter Kit For SoClean 2

• Replace both the filter and check valve every 6 months. Read the Filter and Check Valve Kit Instruction Manual for further instructions.

Sunset Replacement Filter And Check Valve Kit - Compatibility

• This product is not made, authorized, or endorsed by SoClean, Inc. This product was made by Sunset Healthcare Solutions, Inc. and is designed to fit and work in the SoClean 2 CPAP Cleaning Machine.

How to Change the Filter and the Check Valve

1. Open the top lid of the SoClean 2.
2. Remove the old filter by pulling it up and out.
3. Throw away the old filter.
4. Remove packaging from the new filter.
5. Wipe off the exterior of the filter with a soft cloth.
6. Place the new filter into the empty filter slot.
7. Grab the barrel of the current check valve and pull the tubing away.
8. Repeat to disconnect the other end of the tubing.
9. Connect the replacement check valve. The direction is critical. The check valve is labeled with two arrows that should point toward the SoClean 2. Insert the stem of the new check valve as far as possible into the tubing. Repeat on the other side.
10. Reset replace filter function by pressing and holding the "Hourglass" and "Manual" buttons until you see a smiley face on the screen.
11. The machine is ready to use.

• The product warranty is applicable as per the terms and conditions provided by the product manufacturer.

Please call us for specific details.

• No returns will be accepted after 30 days from the date of shipment.
• All returns are subject to a restocking fee as per manufacturers terms and conditions.
• All returns must have an RGA number (Returned Goods Authorization), unauthorized returns will not be accepted.
• We do not guarantee fulfillment of any desired purpose or product suitability to the user and this will not be considered as a valid reason for return.
• The products must be new, unused condition, not tampered with, in original packaging and returned at the customers expense in the original packaging.
• If your return is not due to any manufacturing defect then the original shipping cost will be deducted from the total refund.
• Hygiene, bath and toilet items cannot be returned once opened or used.
• Standard manufacturer terms and conditions apply for return policy of this product.

Please call us for specific details.

Frequently Asked Questions

Q: How long does the filter last?

A: Roughly every 6 months if it's used daily.

Q: How do users know when to change the filter?

A: The LED display will read "Order Filter Kit."

Q: Why does the filter and check valve need to be replaced?

A: New filters and valves are critical for the device to work effectively.

Q: How do I reset the machine after replacing the filter?

A: Press and hold the "Hourglass" and "Manual" buttons at the same time. Only reset the machine after replacing the filter.