Chamber Brite Autoclave Chamber Cleaner - Box Of 10

Chamber Brite Autoclave Chamber Cleaner is a specialized cleaning and descaling agent formulated to remove water deposit oxides and other sediment buildup in steam sterilizers. Made from a combination of acidic salts and cleaning materials, it helps maintain autoclave performance and extend equipment lifespan. Chamber Brite is suitable for use with most steam sterilizers but is not intended for the Elara11 or other pre/post vacuum autoclaves.

Features:

• Effective Descaling Formula: Removes oxides, water deposits, and sediment buildup in steam sterilizers.
• Routine Maintenance: Recommended cleaning every 20 cycles or as needed.
• Specialty Use: Not compatible with Elara11 or pre/post vacuum autoclaves.
• Model-Specific Usage:
  1. Use 2 packets for Models 2840/3850/3870
  2. Use ½ packet for Model 1730
  3. Use 1 packet for all other compatible models

Cleaning procedure:

1. Important - all steps in this procedure must be completed without interruption.
2. When autoclave chamber is cold, remove instruments and trays from the autoclave.
3. Place trays and tray holder in the sink to be cleaned with a stainless steel SAFE cleaner
4. Fill water reservoir with distilled water.
5. Open the door in any chamber spread the contents of a packet in a straight even line along the bottom of the cold chamber, from back to the chamber front.
6. Run a standard unwrapped cycle with 3 minute sterilization time at 273°F (134C) with no drying cycle according to the manufacturer's instructions on all Tuttnauer "E/EA/EZ/EKA/ EK" series units. All cycles referenced are from a COLD start. When the cycle is finished, exhaust the unit.
7. At the end of the exhaust cycle drain the water from the reservoir.
8. Refill the water reservoir with distilled water.
9. Repeat step 6, but without using Chamber Brite.
10. At the end of the exhaust cycle drain the water from the reservoir.
11. Turn the autoclave off and allow chamber to cool.
12. Wipe the interior of the chamber with a damp cloth.
13. Refill the reservoir with distilled water only.
14. For M/MK/Valueklave models, turn the "Fill" knob to the fill position and allow a small amount of water (4 ounces) to enter the chamber. For all E/EA/EZ/EKA/EK models, press the "Manual Water Fill" button and allow a small amount of water (4 ounces), to enter the chamber. For all units remove this water from the chamber.
15. The instrument is ready for use.

Important: Do not sterilize instruments during the cleaning process

Caution:

• Keep out of reach of children.
• Contains mildly acidic ingredients.
• Avoid contact with the skin, eyes or clothing.
• Wash hands well after touching the powder.
• In the case of eye contact flush with continuous running water for at least 15 minutes.
• If irritation persists get medical attention.
• If accidentally swallowed, do not induce vomiting, drink large amounts of water and obtain medical attention.

Note: Do not open Chamber until the completion of step #10

• The product warranty is applicable as per the terms and conditions provided by the product manufacturer.

Please call us for specific details.

• No returns will be accepted after 30 days from the date of shipment.
• All returns are subject to a restocking fee as per manufacturers terms and conditions.
• All returns must have an RGA number (Returned Goods Authorization), unauthorized returns will not be accepted.
• We do not guarantee fulfillment of any desired purpose or product suitability to the user and this will not be considered as a valid reason for return.
• The products must be new, unused condition, not tampered with, in original packaging and returned at the customers expense in the original packaging.
• If your return is not due to any manufacturing defect then the original shipping cost will be deducted from the total refund.
• Hygiene, bath and toilet items cannot be returned once opened or used.
• Standard manufacturer terms and conditions apply for return policy of this product.

Please call us for specific details.